|
|
Investment Casting Process And Our Facilities
Inova / Inovative houses the following fully equipped, self
- reliant departments for producing Investment castings.
|
| |
5.
Dewaxing
Once the ceramic shell is dry, the wax
is melted out either by heating under
pressure in an autoclave, or heating
in wax bath, creating a negative impression
of the assembly within the shell. |
|
|
|
6.Casting
The shell is fired at high temperature to
sinter the shell, remove all residual traces
of wax and pre-heat for pouring. Induction
melting furnace is used to melt the metal
at desired melting point. Having melted
and de-gassed the molten metal, the pre-heated
shell is filled to the required level and
left to solidity. The cooling rate is strictly
controlled to ensure metal purity and casting
integrity. |
|
7. Knockout
When the metal has cooled and solidified,
the ceramic shell is broken off by mechnical
vibration or water blasting or chemical
cleaning. The parts are cut away from
the central sprue by conventional engineering
methods. |
|
|
|
8. Finishing
After minor finishing operations, the metal
castings (identical to the original wax
patterns) are ready for shipment to the
customer. |
|
| |
|
|
|
| |
 |
|
|
